Split 4K60FPS Camera
1, Specifications
DSP chipset: Ambarella H22S85
Sensor:SONY IMX577
Video resolution:4K(3840×2160)/60fps; 4K(4000*3000)/30fps; 4kUltra/30fps; 2.7K/60fps; 2.5K/60fps; 1080P/200fps; 720P 240fps ect
Photo resolution:16MP, 14MP, 12MP, 8MP ect
2.4G WIFI+BT4.2(It can support app operation or Bluetooth remote control. WiFi module must be added)
GPS function (GPS data can be recorded in video. GPS module must be added)
HDMI(HDMI supports 3840 * 2160/30fps maximum resolution output)+CVBS
Six axis Gyro video stabilization:EIS4.0
Support gyroscope data output as CVS document. Support GYROFLOW stabilization
support flat color, which is more flexible in post-processing
Support USB network interface function (special customized firmware is required)
Support one click restore to default settings, no longer afraid of errors and exceptions! Press and hold the record button for 5 seconds in preview mode to restore the default settings.
5-24V wide voltage range input
Type c USB port
2, instructions
Many expansion interfaces are reserved on PCBA. It is convenient to add functions. For example, a serial port is reserved, which can be connected to the GPS module and save the GPS data to the video; ADC key interface is reserved. When the buttons on the board are not enough, many button functions can be added; Two IOs are reserved, which can be used to control motors or other equipment; Wide voltage 5-24V input and 4V output are reserved. Reserved functions can only be added when customers need them.
The length of the connecting cable between the lens module and the motherboard is 80mm FPC by default, and cables of different lengths can be customized. Max. 200mm.
Button Functions
Name | Functions | Descriptions |
Power/Mode Button | Turn on/off camera; select modes | Press the camera to turn it on when it is off; Press once after power on to switch between recording and photographing modes; Press and hold for 3 seconds to turn off the camera. Press once in the menu mode to select the menu option up. |
OK Button | start/stop recording | After entering the menu, press for 2 seconds to switch to the system setting |
DOWN Button/Menu Button | Move downwards | In preview mode, press once to enter menu mode, and then press down to select menu options. Long press to exit the menu mode; In preview mode, long press to enter playback mode. |